UDCAM-S Model_Monopiles
Hello Everyone.
I am working on a design of monopiles under cyclic loading condition.
I am using UDCAM-S model. It is clearly mentioned that this model can be used in offshore structures that experience storm loadings.
I am aware that using this…
SANISAND-MS - PLAXIS UDSM
Application
PLAXIS 3D
Version
PLAXIS 2023.2
Date created
08 Aug 2023
Date modified
08 Aug 2023
SANISAND-MS (Liu et al., 2019) is a bounding surface plasticity constitutive model particularly suitable for reproducing…
PY curves from plate element
Is there any update in PLAXIS latest versions which can help in extraction of py curves from tubular steel pile modelled using PLATE element.
Obtaining the response of bending moment and shear force for the monopile if it the pile is modeled as volume element not as a embedded beam?
I have modeled my monopile foundation for offshore wind turbine. The pile is modeled as volume pile using plate element and it is subjected to the horizontal load at the top. I want to get corresponding response of bending moment and shear force which…
Water pressure in the gap between pile and soil
Hello, I have a doubt whether the Plaxis-3D could simulate the water pressure in the gap between pile and soil. The background of this is when cyclic load applied at the offshore monopile, the gap would appear at least on one side of pile, which would…
PLAXIS MoDeTo CE V20.00.00 Release notes
New in PLAXIS MoDeTo CONNECT Edition V20
Release: January 2020
PLAXIS MoDeTo CONNECT Edition V20 (20.00.00.28) contains the following improvements and updates:
New features
CONNECT Edition with SES Licencing PLAXIS uses licencing through Subscription…
Release of PLAXIS MoDeTo CONNECT Edition V20
With this release, PLAXIS MoDeTo joins PLAXIS 2D and PLAXIS 3D as a CONNECT Edition application. The version name convention has been changed to reflect this. PLAXIS MoDeTo CONNECT Edition V20 i s now fully integrated with PLAXIS 3D CONNECT Edition V20…
Validation report of PLAXIS MoDeTo based on the Cowden clay PISA field tests
Application
PLAXIS 3D PLAXIS MoDeTo
Version
PLAXIS 3D PLAXIS MoDeTo
Original Author
E. Minga, H. Burd
Date created
05 March 2019
Date modified
05 March 2019
This document describes a validation example…
Validation report of PLAXIS MoDeTo based on the Dunkirk sand PISA field tests
Application
PLAXIS 3D PLAXIS MoDeTo
Version
PLAXIS 3D PLAXIS MoDeTo
Original Author
E. Minga, H. Burd
Date created
05 March 2019
Date modified
05 March 2019
This document describes a validation example…