Hi all, I created ContextCapture project from my old laptop. Then I installed the software in a new laptop and tried to load the project. But I was greeted by error message of "Failed to read project file". Please help

Hi....i have a problem with my 3D modelling...the colour of my 3d modelling are not same with original colour...anyone can help me to solve this problem?

Hello,everyone. I'm new here to get start with the software--context capture center. But when I started my own first project. I met some trouble, may anyone tell me what's wrong? When the software running the reconstruction processing, it told me…

Hi All, Having great and extremely frustrating time processing orthophotos inside Context Capture Editor. Every time I try to produce one of the above to a good level of detail, 1cm resolution, I get "Operation cancelled by user" and then the program…

The last photo attached is an infrastructure from our site that we have to do a 3D image on. We used a DJI phantom 4 pro Drone to take pictures. It has a 13.2 mm sensor size and a focal length of 20 mm. We flew the drone around the building in circle…

Hi everybody! I am suffering because it takes a long time to 3D modeling now, so I want new PC. If I want to 3D modeling in 3 hours using 1300 photos, how much PC spec do I need?

What is the point of importing a KML into context capture to edit area of interest if the tiling doesn't adapt to it? Why can't you rotate the area of interest to better suit the existing orientation?

Is it possible to obtain change detection information from successive reality models of the same site using the same parameters for data acquisition? For instance, if we were to create successive models of a construction site, is there some way to depict…

Hi everyone, I am new user to ContextCupture and I am working on a pilot project for a Telecommunication company in my country. We use a DJI Mavic Pro UAV for the video capture of a telecommunication antenna at 3840x2160 dpi in D-Cinelike mode. The…

Can anyone help me...just realized that LumenRT Designer is now part of my select services. Installed it and seems to work fine from AECOsim Building Designer. It was my understanding that it should also work with Sketchup. I have attempted several times…

I am trying to select tiles for production using the 3d view This has always worked in the past but now I can't select one or more tiles with the latest version on CC. Has anyone run into this issue. I notice that the interface for selecting tiles has…

Hey, guys. I've got a small project working with a 5 camera drone. After creating a project, I imported 5 photogroups with corresponding GPS positions into ContextCapture 4.4.7, and submited aerotriangulation by default settings. It looks fine when the…

We acquired high definition imagery along both sides of a roadway in order to produce a model. We were able to process the imagery with GCPs using several different settings. Each time we got the same result of a rippling or bumpy effect on the road surface…

When I put more than one solids from one level to another level, the program will Caton for a long time, but in the V8i version, this operation is very smooth, almost immediately completed。

Hello all, I have been trying to create 3D models from pictures that I have taken of termite mounds. One problem that I think I have is that the lighting was highly variable, so I don't know how much that will effect them. Here is what it should look…

Hello Everyone, I'm a new user to ContextCapture and can anyone help where can I find a sample data for Generating 3D meshes from a combination of photos and lidar point cloud so that I can evaluate the new functionality of ContextCapture.

I have created a 3d model in contextcapture in 3mx format and OBJ format. Because of the RAM usage per job, I made tiles for the production. I want to export this model to LumenRT. When i try to export the 3mx from Microstation to LumenRt, it does not…

Hi All, I have noticed in the later stages of AT that my computer's resources are not being used to their fullest. I have an i7 5700 with a GTX 1080 GPU and 32GB ram. The project in question is 34gigpixels (2036 images). The AT sat at 64% for 3hours…

Hi Everyone I could use some help with a terrain model I am putting together in Descartes for export to Microstation CE and ultimately LumenRT. I am not a civil drafter, and could use some advice in this regard. I have created an STM in Decartes and…

Hello Friends, I am looking to invest in medium-tech cost effective drone for my company. Could someone recommend one to me. Final decision is mine and holds no one responsible to any suggestion provided on this platform. There are many claims on the…

We survey position information (X, Y, Z) use drone. Shooting target is a building of wooden. Which one should be built to select?

Software settings in the CCM, and how to improve the texture resolution?

I've recently migrated to a new desktop and having trouble authorising the license key for Pointools for Rhino. The license manager currently states 'All licenses have been already used', i'm having no luck in redownloading the license file. Pointools…

Is there any additional documentation for modifying the web-viewer. I would like to add hyperlinks to my 3D model in the web-viewer in order to attach additional information. Has anyone done this? Farouk Rohoman