I have 4500 images and 8 control points. first I have run 1000 images , After aerial triangulation 30 % photos not reconstructed .The out put of 3d view not aligned correctly. how to rectify this problem any one can suggest me. Thanks and regards…

Tie point not calibrated properly, 1. We have used Sony Alpha 5100 with 16 mm lens and the data acquired at 120 meter from Ground. 2. 20 Sample images of mid trajectory, processed and the camera model was saved. 3. Entire images are processed…

I did aerial triangulation in 3D party software. I have accurate image positioning and camera details. By using that, can I did reconstruction with out triangulation?

Hi all, Did anyone come across uploading a geoid model into Context Capture when undertaking aerial surveying in UK. An OSGM15 geoid model file in .gtx format is required to be uploaded, so I was wondering whether anyone has already obtained the geoid…

Hi I have 10 aerial photos and want to create an AT, but it fails during keypoint extraction. The 10 photos are divided into 10 photogroups with one photo in each group. Could that be the problem and how does I fix it then? Kind regards Peter

The last photo attached is an infrastructure from our site that we have to do a 3D image on. We used a DJI phantom 4 pro Drone to take pictures. It has a 13.2 mm sensor size and a focal length of 20 mm. We flew the drone around the building in circle…

I am trying to create a production of a small object (close range photogrammetry) using cc. The object is ~ 12 cm x 4 cm , tall and narrow. I have taken images around the object (indoors no geo-referencing) with my camera rotated 90 degrees (portrait…

Hi, there I have a question about the aerotriangulation report, when I first time submit my aerotriangulation, it had the acquisition report. However, when i added new photos and submitted them again, it didn't show anywhere can review the aerotriangulation…

Hello, with the last update 10 of CCE, I try to do the same as in the video exemple, https://www.youtube.com/watch?v=BN0q-5YbMbY&t=62s I use the same datasets, but it seams there are some differents : So how to achieve to have the same result ?…

I have collected geo-referenced drone data along with some SONY DSLR ground photos for a Proof of Concept job on an interchange. I have been trying to use the ground photos to improve the billboard signs along the interchange which have 'holes' in them…

Hi everyone, I am new user to ContextCupture and I am working on a pilot project for a Telecommunication company in my country. We use a DJI Mavic Pro UAV for the video capture of a telecommunication antenna at 3840x2160 dpi in D-Cinelike mode. The…

Has anyone found "detailed" documentation for all the settings when running AT. I am looking for details of of what these settings (skew, tangential distortion etc.) do and when to use them.

I've imported photos from a DJI Phantom 3 and performed an AT on them, it works OK except for a bit of radial distortion. I then bring in and mark my ground control and do another AT using the setting 'Use control points for adjustment', but after AT…

We acquired high definition imagery along both sides of a roadway in order to produce a model. We were able to process the imagery with GCPs using several different settings. Each time we got the same result of a rippling or bumpy effect on the road surface…

I want to do aerotraingulation of 20,000 aerial images taken with sony a6000 Camera, 20MP camera. How to complete this process. Please suggest?

I have 359 Geo-referenced images. These were taken from Drone with Nadir pose in straight line. All photos facing downwards. After aerotrigulation from context capture, those photos are aligned in a circular arc instead of straight path which is the actual…

Hello Everyone, I am testing Context Capture for processing large number of UAV images. I currently have 90 Gigapixel and 150 Gigapixels size dataset. I want to process that in context capture. I have submitted all images(90 gigapixels) for aerotriangulation…

I have a project that has nearly 6000 images. I am trying to do aerotraigulation on that without any sub-block. My pc got hung in pairs matching (25%) step of aerotriangulation. Do I have to do Aerotiangulation in sub-blocks? Previously I was using PIX4D…

AT setting for Component construction mode there is a setting for "one pass" or "multi pass". Just now I was reprocessing some of the previous jobs that were done at "one pass" before. Now I run them with "multi pass" setting. I noticed a reasonable…

Hello, We are currently working on a project where we use a fisheye lens because there is not much space around the object. These are two identical engines, both of which stand next to each other but the photos are divided into two blocks. After AT the…

Hi All, I have noticed in the later stages of AT that my computer's resources are not being used to their fullest. I have an i7 5700 with a GTX 1080 GPU and 32GB ram. The project in question is 34gigpixels (2036 images). The AT sat at 64% for 3hours…

Can ContextCapture Center aerotriangulate using multiple Engines to speed up the processing? I found in the ContextCapture User manual underneath the ContextCapture Engine section that you can specialize the Engines . It says by default the Engine…

Hello, I'm new to CC. What photo acquisition app do you use? Before CC I was using Pix4d (another photogrammetry soft). They have a nice "Pix4d Capture" app. Fire up the drone and let the app collect images along the grid. It still works for me in…

[Context Capture] Error: Failed to submir aerotriangulation, Details: Failed to get machine ID. How to solve it?

Join Benoit Fredericque and Arnaud Durante online Thursday, October 27, for the next Bentley Reality Modeling Special Interest Group (SIG) workshop, Optimize Your Cluster and Hardware Configuration . Register today and invite your colleagues! Complimentary…