Hello all, I currently have a bridge with 3 spans in OBD. In span 1 and 3 I'm using concrete girders while in span 2 I'm using built up steel girders. I will be using LEAP Steel to design the steel girders and Leap concrete for concrete girders. My question…

I've an OBM 3D bridge 'design' model setup file 'SteelBridgeReplacement.dgn'. Using this file I have created mutliple 'drawing' models (Plan, Elevation, Typical Section, Pier Geometry, etc.) in a separate file (planProductionBase.dgn) by referencing the…

There does not appear to be a way to model a built-up plate girder diaphragm in OpenBridge (I have to place diaphragms between adjacent girders - I cannot skip a girder, and I cannot model a built-up section), or to model a substringer system. I see notes…

Hello again, I have other question, I tried to conect OP model with RM Bridge but the program send me an error, I don't know how can I fix it Do you know how to fix the error E0053? or give an idea of what this Error E0053 wants to tell me

I made a video of how I used OBM to optimize span layouts, check vertical clearances, check clash detections, etc during the pursuit phase of a project. Being able to do these things in OBM led to us winning the project so I thought it would be worth…

I have a concrete deck, the deck is curved and slopes in two different directions. When using ProConcrete Signle RebarSet I am defining the curved sloped outline for the bars but the bars are not following the cross slope of the shape, see image attached…

I am modeling a conceptual design for a cable stayed bridge. I have modeled other bridges in Open Bridge Modeler however I dont think it allows for cable stayed bridges. I know RM Bridge does. Should i Just try and do everything in RM? the main goal of…

Title: SIG Workshop: OpenBridge – Plans Production Process and Tools Host/Presenter: Steve Willoughby, Senior Application Engineer, Bridge & Tunnel at Bentley Systems, Inc. Date/Time: February 11, 2021 at 2:00 P.M. EST Register Now! This OpenBridge…

I am working on the Bentley tutorials but I am confuse on how all of the Open Bridge Desiner connects to Open Bridge Modeler and Leap. do we need to start from OpenBridgeDesigner to have the Modeler and Leap work together. When I create in OpenBridge…

I am currently design 4 bridges in LEAP Steel v19 but am encountering an issue with the tool to automatically generate loads for the wearing surface of the structure. The bridges are all of a similar type, but some are wider than others and one is on…

New video up on my channel giving an in depth look at how to layout beams in OpenBridge Modeler, link below. I cover straight (chorded) prestressed concrete girders as well as curved steel I-girders. Definitely a few things that will save you a lot of…

Title: SIG Virtual Workshop: OpenBridge – 3D Deliverables and Workspaces Development Status for USDOTs Date/Time: July 7, 2020 2:00 P.M. EDT Presenter: Alex Mabrich, User Success Manager, Bentley Systems, Inc. Register Now This OpenBridge…

Hello That is my first post on this community. I am doing the training for OpenBrigde and in the Module 6 practice I have been noticed whit this error but I dont know why happen this. I populated following the instructions as you can see:…

Hi All, I'm calculating the screed elevations, top of haunch elevations, and final deck surface elevations. I had the following questions: Is there a way to get OpenBridge Modeler or LEAP Bridge Steel to provide these elevations? Or is the best…

Title: SIG Virtual Workshop: OpenBridge – Workspace Configuration in OpenBridge Designer Presenter: Steve Willoughby, Senior Application Engineer, Bentley Systems, Inc. Date/Time: June 11, 2020 2:00 P.M. EDT Register Now This OpenBridge…

OpenBridge Special Interest Group: Sharing Information Among Disciplines Using OpenBridge Designer Host: Alex Mabrich, Senior Application Engineer, Bentley Systems, Inc. Date/Time: March 26, 2020 at 02:00 P.M. EDT Register Now This OpenBridge…

OpenBridge Special Interest Group: Bridge Reports - From Models to Analytics Host: Alex Mabrich, Senior Application Engineer, Bentley Systems, Inc. Date/Time: 13 February 2020 at 02:00 P.M. EST Register Now Bridge reporting…

I am using OpenBridge Modeler CONNECT Version 10.07.00.50 to make a test model of a bridge that we are currently working on. It's mostly a proof of concept but I am running into a few issues while modeling. The primary issue being that with the relatively…