Hevacomp Electrical systems - Twin and earth cable for 3phase
Hi,
I am working on a project where a contractor has used 2No 4mm twin and earth cables to feed a 32A TP&N 5pin socket.
I need to run a cable calc to reflect his installtion. Is it possible, using Hevacomp Connect, to run a cable calc based on the…
Large loss of PSCC across first leg of circuit from Transformer to Main switchboard
Afternoon all
I hope someone can shed some light on what i think is a problem with hevacomp connect, i am currently working on a large project and at the transformer, we have a fault current of 24kA but 10m upstream we have a fault current of 7.9kA…
Multiple conductors in parallel
I am drawing an installation which has several cable runs where multiple cables are connected in parallel. e.g. 2 x 185mm single core AWA per pole, or 2 x 95mm 4 core SWA. Please can you advise the recommended way to represent these in Connect?
Underground cables appear to be undersized
Product(s):
Hevacomp Connect
Version(s):
V8i (N/A)
Environment:
N/A
Area:
N/A
Subarea:
N/A
Problem
Underground cables appear to be undersized when the calculation is run
Solution
You should…