Good morning, I have a skewed roadway segment. I was using the "Civil Cross section 2 Points" tool to get my section from my corridor. However, I dont know if there is a tool to get the same cross sections along the approach I mean at intervals. I'm using…

I am trying to add a template drop to introduce a curb. How do I set up my template drops so that the template with curb begins at an exact station? Do I need a transition? The two templates are identical except for the curb and left end condition. As…

Does anyone know how to clip off part of the civil cell? I used intersection civil cell that joined by a template to form side road, see image. Add clipping reference worked only on the template part, but it didn't work on the civil cell.

I am trying to apply an end condition exception to a template that has a right outside edge of pavement that is controlled by a horizontal feature constraint so the outside edge of pavement is able to vary (for example, at a turn lane taper transition…

When running templates with trigger lines in ORD, I am finding that I cannot have trigger lines on both sides of a corridor that search for the same feature definition. An example would be using a trigger line that starts left of the center of my template…

Hi I am using openroads 2021 Release 2. I lock the corridor once the edits are done to avoid it processing. But whenever i open dynamic cross sections view, the corridor gets processed. The time taken to process is much larger than the time taken…

I'm trying to annotate kerb types using item types to store and recall the type for each element. I've managed to do it fine for civil geometry which shows the correct value assigned to the geometry (top one below) but it doesn't seem to work for a…

i want to hatch the the carriage way and the shoulder with a color..please help..an using ss2

Hello, Currently i'm running into a problem regarding the function ' Synchronize from Library' on a template in my corridor, I didn't change anything in the template design. After using synchronizing, geometry that I added separately of the corridor…

I have a rough alignment in a river with two additional alignments on either side that represent the toe of slope. I created a template that essentially represents a river bottom with 2:1 slopes on either side. Whenever I try to add a point control that…

test7.dgn Original Ground.dtm Hello, I have a drawing where I am creating an intersection over terrain. I am in the process of creating alignments with profiles at each of the 4 corners for each of the flowlines and back of sidewalks (shown in red). …

Hello All. Running 2021 R2. I've modified a KYTC template for my project. The template uses "switch points" to control whether the end condition and sholder is displayed (for use at intersections, entrances, etc.). My corridor is set up and I used the…

I have some cut and fill lines that have appeared in my corridor model. I am unable to delete this line and it remains after deleting my template drops in the area. The first photo shows the area with my corridor and template still there. The photo…

All, Was wondering if any of you have ever experienced this. I am in the IDOT (Illinois Dept of Transportation) workspace. As shown below, in my template library, the aggregate is modeled with feature definition. Whilst, in Cross Section Viewer and…

I'm having trouble getting components to display in my corridor. The linear features are all there, but only have components on the right side. I'm still new to OpenRoads (2020 Release 3 10.14.04.04) so I'm not sure what's causing this; probably something…

I am attempting to show the mainline corridor on a sideroad profile so that I am tying into it correctly. My mainline corridor is referenced in. What exactly are the steps to show this on the sideroad profile? When I attempt to select the mainline corridor…

I'm interested to know people's approach to this type of situation, this example will be more familiar to people in the UK but I'm sure there will be other similar situations. If you use corridors it's easy to create a Template which has a kerb, concrete…

I am trying to generate cross slope report @ 10 m interval by station base or station offset report but i am not getting appropriate values of cross slope in report. It seems correctly in cross-section view. Am missing something ?? Images is ready for…

Hi All, I am trying to understand if there is any way I can find the name of the corridor and alignment to which my mesh belongs to? There has to be some relation, I want to read that information by Itemtype expression. Regards, Jaimin Pate…

I have been facing a problem with super elevation for some months now. The Alignment , corridor and superelevation are in different files. More often, the corridor file does not reflect the super elevation. The point control window in Corridor objects…

Hi, Does anyone have some experience with discrepancies using corridor component quantities tool, I have been trying to get some quantities from a corridor that is attached as reference in a different working file. When I compared the quantities extracted…