Product(s):
InRoads, MX, GEOPAK
Version(s):
08.11.09+
Area:
Horizontal Geometry
Original Author:
Andrea Garecht, Bentley Technical Support Group
Problem:
When running the command Single Offset Entire Element on a…
Product(s):
InRoads
Version(s):
08.11.07.615
Area:
Geometry
Original Author:
Jacquelyn Pettus, Bentley Technical Support Group
Question:
How can I free an alignment and/or cogo buffer that has been locked by another…
Product(s):
InRoads
Version(s):
08.11.07+
Area:
Geometry
Question:
How can cogo points be created with the same point name as the horizontal alignment points?
Answer:
First go to Geometry>Horizontal Curve Set>Events…
Product(s):
GEOPAK
Version(s):
08.11.09.493
Area:
General Geometry
Original Author:
Kevin McDonald, Bentley Technical Support Group
Error Message:
The specified module could not be found. (Exception from HRESULT:…
Applies To
Product(s):
InRoads
Version(s):
08.11.07.615
Environment:
N/A
Area:
Geometry
Subarea:
Original Author:
Jacquelyn Pettus, Bentley Technical Support Group …
Product(s):
InRoads
Version(s):
08.11.07+
Area:
Geometry
Original Author:
Jacquelyn Pettus, Bentley Technical Support Group
Question:
Where is the symbology controlled for the active horizontal alignment?
Answer…
Applies To
Product(s):
InRoads
Version(s):
08.11.07.615
Environment:
N/A
Area:
Geometry
Subarea:
Original Author:
Sanders Thomas, Bentley Technical Support Group
…