ORD 10.12.2.4 suppose you're in dgn file "A" attach a dgn file "B" that has a horizontal alignment with an active vertical. While in file "A" you can create a profile window for the alignment shown in File "B" and you'll see file "B's" vertical geometry…

I don't think I've had this issue in the past but when I do a 3D cut on the profile of a line through a bunch of 3D cut/fill solids generated by ORD using the Create Closed Mesh tool, other things show up from the 3D model but not the cut/fills. Hopefully…

I requested additional survey to be done for me project. The surveyor added the csv data into the field book for my terrain file. This caused my current vertical profile to be dramatically shifted from where it should have been. Is there a way to avoid…

I have generated cross sections for a railyard using one alignment. Running alongside this one “main” alignment are several other alignments comprising the tracks of the railyard. These alignments all contain 3D profile information. Ideally, I would…

Whenever I try to open the profile view openroads crashes. (crashes when the command says select view and I click into the box to see it) I created a profile from my horizontal alignment and then drew a new vertical over the profile. complexed the vertical…

In PowerCivil it was possible to change direction of the profile from right to left. Will this be possible in ORD? We have an alignment which goes from east to west, and would we would like to change the direction of the profile so it matches. From…

Hi, I am creating profile sheet the value FRL is roundoff like 100.139 to 100.140 in profile sheet. How can I edit and precise FRL value in profile sheet. Thanks

This is probably a very simple question. I use the quick profile transition tool a lot but once an arc becomes part of a complex element I can't then use it on that arc. I typically use the tool before complexing but what is the best way around this…

Hello all. I was recently given a new assignment that no one at my company has had to do before, and I am having trouble figuring out if ORD has an automated way of doing this, or if it has to be done manually. For this current project, I have an alignment…

Hello Is it possible to retrieve the difference between the active profile and active surface? I couldn't find a text favorite that can do this. Or is it possible to calculate it? Our client likes to see it along the alignment and profile view.…

I am trying to grab the EOP line from my corridor model to use as an intersection point for the driveway CL I am drawing (red line). When I try to grab the EOP line, I get an "Invalid Geometry Type" error. But there the CURB_FACE_TOP_L line is right next…

Curious if it's possible to change location of where my profile named boundary is placed? The profile I created is exaggerated by 10, you can see the starting elevation is 90 & matches the Y value. I would prefer if my Y value equaled 900 at the…

In this file, I have referenced in 3d linear elements that represent the ROW (yellow). The ROW profile has been assigned by the surface terrain and when I use the civil analysis tool, the correct elevation is shown.\ But when I open the dynamic…

I'm sure there's probably a simple mistake, somewhere, but I've checked everything I can think to check and have come up empty-handed on this one. In short, I'm trying to annotate a couple new profile models, but instead of getting a profile grid with…

In OpenRoads Designer, what is the best workflow to create profiles for things like kerb lines and such? In PowerCivil/ Geopak, it was pretty easy to draw a profile of any element with a profile and place that profile onto a plan sheet. In ORD, it seems…

How do I go about annotating a profile model? I need to show curve radii, slopes, k values, curve length, etc. Here's a picture of my screen.

I am attempting to profile the gutter line for an intersection return. One one end of the return I want the profile to match the existing gutter line, and on the other end of the return I want the profile to match the proposed gutter line from my corridor…

Hi Guys, I cant figure out how to correct station intervals in my production profile sheet . After using chainage equation, ahead station of my profile showing unevenly. Regards , Lalit

Hello, I need some guidance on how to display utilities on the roadway profile. the way I've done it so far is by creating a profile run of my utility. However, this only works on one specific file, and I am not able to reference this file in the…

Hello- I am experiencing weirdness with my alignment/profile in OpenRoads Designer 2021 R1. I have a 3 mile trail with many horizontal and vertical curves. I know there may have been limitations with Geopak/V8i with the number of vertices in a profile…

I'm wanting to create a line between points in profile to represent junction visibility and so I use Civil Accudraw to set the offset above a point projected from the sideroad centreline (dZ option) and then I want to set the height at the end of the…

Afternoon all, I'm relatively new to the Bentley ecosystem, so please forgive me if this is documented somewhere. I've noticed odd behavior when I'm trying to edit complex profiles and I'm hoping someone who knows better could give me some insight into…

For some reason, I cannot get my profile to display. It starts out like the first picture then i had to zoom in (a lot!) to get to the station range of my alignment as in picture 2. It use to show up with the entire proposed profile and ground line. if…

Hello. I have 2 questions: 1)After I open the Cross Section View, the view it s mirrored like this: Left is in the right side and right in the left side How can I solve that? 2) Where can I change the stationing in profile view? I need stations…