SUDA Feature Definition Shows 3D Cells in 2D
I've created a feature definition for a manhole and defined separate templates for the plan view cells and 3D cells. However, when I place the manhole in my model it shows both the 2D and 3D cells in my 2D environment. Is there a setting that I am missing…
GEOPAK SS4 Crashes when SUE nodes are selected
I have been working regularly with SUE in this file for about 3 months, and did not have any issues until last Friday when GEOPAK crashed when I selected SUE nodes. I can click on any other item in the file, including SUE links and edit normally. I can…
Error Connecting Conduit between nodes across referenced DGN files in Subsurface Utility (SUE/SUDA)
In large projects, often there are multiple files representing different areas of utilities, which creates the need to have a conduit connect to a node within a referenced DGN. When ever I do this, the program shuts down entirely or does not allow it…
Longitudinal slope in SUDA for inlet spacing
When we try to compute our design all of the longitudinal slopes that we have entered into each frame and grate are reset to 0.000 ft/ft. Is there a way to prevent this from happening. We are using SUDA within Power GEOPAK V8i SS4.
SUDA keeps changing the Width and Length of Structures, Drop Inlets and Manholes whenever I compute
How do I prevent SUDA from changing the length and widths of my manhole and drop inlet structures every time I click compute?
SUDA automatically adjusts the bottom elevation incorrectly.ss
When setting the bottom elevation of a structure, for example a Grate Inlet with a depth of 2', SUDA will automatically drop the elevation do the depth is 2.78'. Is there a way to disable to this automatic feature or bypass this option to set the correct…
flex tables
Will there be flextables created for sanitary lines? This is valuable from a plan production stand point.
Nodes not placing straight
I am wondering why when I place a node (only headwalls) they are not placing straight. I have reviewed my cell files, and they are modeled correctly as a .cel.
Thanks!
Kim
Video: Changing Pipe Slope Annotation Units to permille
Product(s):
InRoads, MX, GEOPAK, OpenRoads Designer
Version(s):
08.11.09.789+
Area:
Subsurface Utilities
This video demonstrates how to show pipe slope annotation in permille units in Bentley's Subsurface Utilities.
Click…
Can't get Prototypes, Catalogs, Storm Data... anaylsis data to show up when utility model is created.
I'm trying to move what I had set up for SUDA in GEOPAK SS4 over to OpenRoads Designer. I have set up a workspace and copied my cel library containing all my SUDA cells and my dgnlib containing all the element templates, feature definitions, prototypes…
[SS4] Liniar drain in SUE
Hello everyone,
We are using SUE for the storm water drainage and electrical ducts on a large design and build contract concerning railway platforms.
Now we are in a situation where we need a linear drain to be placed parallel to the tracks, yet I…
3D cell not placing properly
We have developed a series of 3D cells to be used with SUE/SUDA. For some reason, when we place the headwalls, the 2D and 3D properties do not align. Can someone please advise how to resolve this?
Thanks,
Kim
"Extract Utility From Graphics".
If you have multiple Pipes coming into one location, like Multiple Catch basin's draining to one Manhole, can you combine Multiple nodes created from extract utility into one node that represents the Manhole? then when I add my cell that represents my…
Video: Using Civil Accudraw to Place Drainage Node
Product(s):
InRoads, MX, GEOPAK
Version(s):
08.11.09.878+
Area:
Subsurface Utility Design And Analysis
This video demonstrates how to use Civil Accudraw in conjunction with the Place Node command in Subsurface Utility Design…
What is the recommended workflow for creating drainage profiles for plan sheet production using SUDA in SS4?
I can create and view both analysis and engineering profiles of my SUDA Storm drain elements. The only way I can figure out for creating profile sheets to include in my project plans is to export the engineering profile to drawing. Then it comes in as…
SUDA - Sample cel library and profile runs.
I have been using Open Roads Corridor Modeler for a few years now and now I'm looking into using SUDA to do water and wastewater line design.
Open Road Corridor Modeler came with a fairly large and robust template library, does SUDA have something similar…
[OR] Creating SUDA Inlet Cell - Gap between top and bottom when placed
Hello,
I've been trying to create an inlet cell for use with the Subsurface Utilities in OpenRoads (InRoads). So far so good, except when the cell is placed I get a gap between the top and the bottom. Global origins are the same units are the same,…
Video: Remove and Disable Subsurface Utility Design and Analysis from MXRoad
Applies To
Product(s):
MXRoad
Version(s):
08.11.09+
Environment:
N/A
Area:
Subsurface Utility Design and Analysis
Subarea:
Original Author:
Purva Lakde. Product Advantage…
How do I invoke SUDA?
How do I invoke SUDA? All I see in GEOPAK SS4 is Tools/Product Add-Ins/Activate Subsurface Utility Engineering
For some reason I do not see StormCAD listed under this sub-menu. Do I need to edit a configuration file to make this appear? Your help…
Limitation on number of pipes when importing MX Drainage model to SUDA
I have an MX Drainage model that includes a section with 2 pipes between the same nodes (MX Drainage allows up to 3). When I import it into SUDA it comes in without error but only with 1 pipe instead of 2. Is this a limitation of SUDA? If so, is there…
Creating UK Storm Data
Product(s):
InRoads, MX, GEOPAK
Version(s):
08.11.09.845+
Area:
Subsurface Utilities
This video demonstrates how to create UK storm data for peak flow and simulations, in Subsurface Utilities.
Click the video below to play…
Dataset for SUDA training
Hi
The dataset for placing inlets with precision and speed is missing in the Subsurface Utilities design and Analysis learning path. IS there a link were I can download it from?
Thanks
Steyn
StormCad activation in PowerCivil
Hi
Im currently working trough the Subsurface Utility Design and Analysis Learning path , Im getting stuck at Lay Out and Compute a Simple Site where they start with the Defining Catchments from shapes and network calculations. Im missing some options…
Video: Create 3D Linestring from Subsurface Utility Structures
Product(s):
InRoads, MX, GEOPAK
Version(s):
08.11.09+
Area:
Subsurface Utility Engineering
Original Author:
Bentley Technical Support Group
This video will demonstrate steps user can take to display a 3D linestring…
Place a lateral command problem
When I try to use the command "place a lateral" it does not work out for me. I use an existing stormwater pipe, adding a new pipe and node with the same type as the existing pipe. The only product of the command is a point on the correct level, but no…