Can you change the size of the arrowhead in Inroads? I'm using the slope vector tool: but the arrowheads are coming out very small: I'm using Microstation v8i SS10 v08.11.09.912 Inroads v08.11.09.918 Thanks for the help!

Good Afternoon Folks, Has anyone converted their configuration from "MicroStation" & "InRoads" to "Power InRoads"? Any experience you're willing to share would be greatly appreciated. Thanks, and have a Great Labor Day Weekend,

Hello Folks, Has anyone experimented with running InRoads SS2 over MicroStation SS10? If you have, what has been your experience? Thanks and have a good evening,

I am trying to import survey points and have them show as they used to in SS2. when using the text import wizard on ORD I get the points displayed as "Decorations": what I need is for the point to show up like in SS2 and SS4 when they come in as…

I have an existing surface and a proposed surface created and would like to cut cross sections so that I can see the changes in elevation. Because I am working with strictly surfaces I do not have an actual alignment, or a corridor to cut across. The…

Good Morning, See attached illustration (orange circled area). How can we place the "PC" text on the same line as the Station Text, or is it not possible? Thank you for your time,

InRoads v8i ss2 can you save a template edit from .ird to the .itl? If you make an edit in the corridor IRD file and it works out well, is there a way to then save it to the ITL file so it can be used again elsewhere, or do you just have to recreate…

Hi, First time asking a question on Bentley Communities. Recently I noticed that the Site modeller functionality of my Inroads is no longer available and I did not see it in the Add-Ins window. This mostly affects cross sections and corridor work…

I have a set of plans that was originally done in InRoads and v8i and now they want it to be updated or converted to Open Roads; is there a best practice way to do this? Or do I have to create these drawing from scratch using Open Roads and importing…

Hi We have faced some issues with contours in OpenRoads Designer. We do not think it has something to do with how the surface is created because we have both tried to import a surface as LandXML and also created it by points directly in OpenRoads Designer…

The last two times I've tried to define a point by northing easting, I tentative snap to a point but the point returned is a few feet (up to a 100 or so feet) away at what appears to be a random location. The random location is the same every time i snap…

Please anyone help me in to display the Super elevation profile in Long section box. Thanks in advance. I am using Open roads Designerx64-10.04.00048 - 2018 release 2 version

I am unable to import .LAS file as point clouds in Microstation SS4. Each time it says "Convert Failed". I used to be able to use Data acquisition in previous versions but can't find that tool anymore. Since migrating to ss4, it been confusing on how…

hello - I seem to remember a document explaining how to integrate Inroads and PW together, specifically around CAD standards/XIN files/project files? If such a thing exists, can someone fire me the link? thanks!! Kirk Peterson

Is there any tool to set the max / min elevations of cross sections (create cross sections) in Power InRoads V8i (SELECTseries 4) Version 08.11.09.904. As far as I know, this functionality existed in ss2, but I can no longer find it. As a workaround…

I'm a student using InRoads V8i SS10. This is my first time using, and I have limited access to my professor due to COVID-19 protocol. We've been given the 3-D elements necessary to create a surface. I am attempting to do so by InRoads File --> Import…

I am trying to design an underground utility pipe using InRoads. I drew out the horizontal and vertical alignments. Part of our design requires taking any vertical turn less than 8 degrees and turning it into a curve with a radius of 360'. I have to do…

I am running InRoads SS4. I am trying to calculate cut but only in a certain part of the road. I have changed my template so I can ignore the components I need to in order to get that certain section. My issue is the following: there is a column in the…

Dear All, I had Created a 3D cell of guard Rail as shown in the image when I am copying the default model to create Left and Right guardrail, My design sheet show nothing. can anybody suggest any solution? For your reference, I am attaching the image…

https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/19065/video-create-a-fixed-ditch-component I found this great video about creating a fixed ditch under a fill condition. I am trying to create something very similar…

I would like to use the InRoads Bridge Geometry tools to quickly layout girders on a tightly curved bridge. This would be a very useful tool if I could get it to work. Instead of manually drawing girder lines and checking max/min deck overhang, max/min…

Hello, I am using PowerGEOPAK SS4 and my dgn file has about 15 models so it takes forever to close a file (at least 5-10 minutes) because of the Status "Scanning Model: x" dialogue box that goes through every single model. Does anyone have the same…

Power InRoads V8i (SELECTseries 4) Version 08.11.09.904 I am having issues with event points (seemingly) randomly not being annotated on my profiles through 'view vertical annotation'. I created a set of profiles using plan and profile generator…

I am a student and want to learn how to use this software. How do I use it for free. I sent my information to Bentley, but they never returned.

Hello all, I installed the current version of InRoads (ir81109918en.exe) on top of my MicroStation V8i SS4 V08.11.09.862 running on a Workstation with Microsoft Windows 10. The Installation of InRodas works fine and finished without any error message…