SIG Virtual Workshop: Geotechnical Analysis SIG - Using PLAXIS to Determine Factors of Safety - Jan. 14, 2020
Geotechnical Analysis SIG: Using PLAXIS to Determine Factors of Safety Host: Micha van der Sloot, Technical Support Manager, Bentley Systems, Inc. Date and Time: 14 January 2020 at 10:00 A.M. CET and 04:00 P.M. CET
Register Now
This Geotechnical…
Safety calculation with a Target Value
Application
PLAXIS 2D
Version
PLAXIS 2D
Date created
28 June 2013
Date modified
28 June 2013
A special option in the Safety calculation is the Target ΣMsf loading type. At first this type of calculation works just…
Safety analysis and undrained behaviour
Application
PLAXIS 2D PLAXIS 3D
Version
PLAXIS 2D PLAXIS 3D
Date created
07 March 2013
Date modified
07 March 2013
Safety analysis in Plaxis uses a so-called phi/c reduction method in which the strength of the soil…
Safety analysis and displacements
Application
PLAXIS 2D PLAXIS 3D
Version
PLAXIS 2D PLAXIS 3D
Date created
09 July 2012
Date modified
09 July 2012
When doing a safety analysis using the phi/c reduction method, tan(phi) and c are reduced according…
Structural tables for a safety value show no values in PLAXIS 2D 2016.00
Application
PLAXIS 2D
Issue status
✔ Solved
First Affected Version
PLAXIS 2D 2016.00
Found in Version
PLAXIS 2D 2016.00
Fixed and Released in Version
Solved in a recent version
Issue #
5154
Date created…
Updated mesh in 3D Safety analysis incorrectly updates the geometry
Application
PLAXIS 3D
Issue status
✔ Solved
First Affected Version
PLAXIS 3D 2011.00
Found in Version
PLAXIS 3D 2011.00
Fixed and Released in Version
PLAXIS 3D AE.00
Issue #
21867
Date created
29…
Forces in plates using elastoplastic M-kappa diagram not correct in a Target SumMsf Safety calculation
Application
PLAXIS 2D
Issue status
✔ Solved
First Affected Version
PLAXIS 2D 2015.00
Found in Version
PLAXIS 2D 2015.00
Fixed and Released in Version
PLAXIS 2D 2015.01
Issue #
23426
Date created …
Beam and embedded pile structural forces not correct after a Target SumMsf Safety calculation
Application
PLAXIS 3D
Issue status
✔ Solved
First Affected Version
PLAXIS 3D 2013.00
Found in Version
PLAXIS 3D 2013.00
Fixed and Released in Version
Solved in a recent version
Issue #
21948
Date…
Safety analysis after fully coupled flow-deformation analysis uses incorrect pore pressures
Application
PLAXIS 2D PLAXIS 3D
Issue status
✔ Solved
First Affected Version
PLAXIS 2D AE.00 PLAXIS 3D 2013.00
Found in Version
PLAXIS 2D AE.00 PLAXIS 3D 2013.00
Fixed and Released in Version
PLAXIS 3D 2017.00…
Embedded pile row forces not correct in a Target SumMsf Safety calculation
Application
PLAXIS 2D
Issue status
✔ Solved
First Affected Version
PLAXIS 2D 2012.00
Found in Version
PLAXIS 2D 2012.00
Fixed and Released in Version
PLAXIS 2D AE.00 PLAXIS 2D Classic
Issue #
20312
…
Sensitivity analysis does not give results for the criterion Factor of Safety
Application
PLAXIS 2D
Issue status
✔ Solved
First Affected Version
PLAXIS 2D 2010.01
Found in Version
PLAXIS 2D 2010.01
Fixed and Released in Version
PLAXIS 2D 2011.02
Issue #
17259
Date created …
Staged construction/Flow condition settings might not be loaded correctly in 2D 2017
Application
PLAXIS 2D
Issue status
✔ Solved
First Affected Version
PLAXIS 2D 2017.00
Found in Version
PLAXIS 2D 2017.00
Fixed and Released in Version
PLAXIS 2D 2017.01
Issue #
SW-18756
Date created…
3D2011: Not possible to use Hoek-Brown material model in Safety phase
Application
PLAXIS 3D
Issue status
✔ Solved
First Affected Version
PLAXIS 3D 2011.00
Found in Version
PLAXIS 3D 2011.00
Fixed and Released in Version
PLAXIS 3D 2012
Issue #
17104
Date created
16…
Safety analysis: Ignore undrained behaviour cannot be deactivated
Application
PLAXIS 3D
Issue status
Open
First Affected Version
PLAXIS 3D 2011.00
Found in Version
PLAXIS 3D 2011.00
Fixed and Released in Version
Issue #
15182
Date created
11 July 2011
Date modified…
Safety analysis and Updated Mesh
Application
PLAXIS 2D PLAXIS 3D
Version
PLAXIS 2D PLAXIS 3D
Date created
27 September 2018
Date modified
27 September 2018
When using phases with Updated Mesh ( UM ), the Safety analysis will use the deformed mesh…