01. Max allowable nozzle loads (Fmax), why Δ, K & α are zero?
02. Tubesheet, where do the terms l1, l1' and gamma (γ) come from?
03. Change the values for Clamp Wa and Wab
04. Set "d70" parameter
05. Why maximum test pressure of all component is not considered as vessel test pressure?
06. Allowable longitudinal compressive Stress (σ c,all) is not calculated as per EN13445-3 Clause 16.14-29, Why?
07. Nominal elastic limit is not calculated correctly. The nominal yield strength (σe) must be Rp1.0% / 1.3, Why it is not matching?
Bentley AutoPIPE Vessel
Support Solutions & FAQ's
Calculations