Applies To
Product(s):	OpenPlant Isometrics Manager CONNECT Edition
Version(s):	10.XX.XX.XXX
Environment:	Windows 10 (64-bit)
Area:	Bill of Materials
Subarea:	-
Original Author:	Evander Cabalagan, Bentley Global Technical Support

Background

By default, gaskets belong to Field in Bill of Materials as the IE_FIELD value is 1. On this scenario, some gaskets must be placed under Shop and some must be in Field.
Note: On this method, component property is used to divide the gaskets in Bill of Materials.

Steps to Resolve

1. Select a gasket and input a value in chosen component property. For instance, TAGNUMBER=A123.
   
2. In report.def, add the following values in Shop and Field.
   
   
3. Save the changes in report.def file.
4. Generate the isometrics to verify the result.
   
   
   
   

See Also

communities.bentley.com/.../how-to-disable-the-terminator-on-leader-line-in-isometrics-via-openplant-isometric-manager

Still a Problem?

If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group.  Please include a list of all relevant details to get in depth analysis for a solution or workaround