Applies To
Product(s):	OpenPlant Isometrics Manager CONNECT Edition
Version(s):	10.XX.XX.XXX
Environment:	Windows 10 (64-bit)
Area:	Settings/Attributes
Subarea:	-
Original Author:	Evander Cabalagan, Bentley Global Technical Support

Background

The goal of this article is to make Rating and Facing values of Nozzle connected on pipe or equipment be visible in generated isometrics.

Steps to Accomplish

1. Add Facing property in Nozzle class by following the given link.
https://communities.bentley.com/products/plant/w/plant_design_and_engineering__wiki/50499/how-to-add-facing-property-on-the-nozzle-of-the-equipment-in-openplant-modeler-connect-edition 
2. Launch Bentley Class Editor. Browse for OpenPlant_3D.01.08.ecschema.xml and supplement with OpenPlant_3D_Supplemental_Isometrics_Isoextractor.01.08.ecschema.xml.
3. Find Continuation Expression in Nozzle class. Add the given value.
"$NOZZLE: " & this.EQUIPMENT_TAG & "$RATING: " & this.RATING & "$FACING: " & this.FACING

4. Save the changes.
5. Launch OpenPlant Modeler and attach new nozzle on the equipment or pipe.
6. Generate the isometrics to verify the result. 

See Also

communities.bentley.com/.../13393.settingsattributes-openplant-isometrics-manager

Comments or Corrections?

Bentley's Product Advantage  Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!