Solved issues - PLAXIS


This section contains a list of resolved issues in PLAXIS 2D and PLAXIS 3D. See subpages for all resolved known issues.

History

PLAXIS 2D/3D 2023.2.1

Released: October 2023
The following issues were resolved

Solved Known issueApplicationIssue #
Error when generating the mesh for embedded beams set to grout bodyPLAXIS 3D1268947
Groups created in green modes are lost when reloadingPLAXIS 2D
PLAXIS 3D		1268947
Incorrect visualisation of phreatic level in PLAXIS 3D 2023.2PLAXIS 3D1268947
Dynamic point loads in axisymmetric 2D models do not consider the radiusPLAXIS 2D1092643
OpenSSL vulnerability not affecting PLAXIS 2D or PLAXIS 3DPLAXIS 2D1149242

PLAXIS 2D/3D 2023.1

Released: February 2023
The following issue was resolved

Solved Known issueApplicationIssue #
Report generator issue with Material information when different material types for plates and anchors used in projectsPLAXIS 2D1025141

PLAXIS 2D/3D CONNECT Edition V22.02

Released: October 2022
The following issue was resolved

Solved Known issueApplicationIssue #
Some Input tables and Output results may not consider project units in PLAXIS CONNECT Edition V22 [V22.01]PLAXIS 2D
PLAXIS 3D		861673, 989888

PLAXIS 2D/3D CONNECT Edition V22.01

Released: May 2022
The following issues were resolved

Solved Known issueApplicationIssue #
PLAXIS Design Approach partial factor not applied to material parameters when loading older filesPLAXIS 2D629857
PLAXIS Calculation Manager does not save in PLAXIS CONNECT Edition V22.00PLAXIS 2D
PLAXIS 3D		791427
Visualisation issue of embedded beam connections in Staged construction in PLAXIS CONNECT Edition V22.00PLAXIS 2D
PLAXIS 3D		845837

PLAXIS 2D/3D CONNECT Edition V22

Released: January 2022
The following issues were resolved

Solved Known issueApplicationIssue #
PLAXIS LE importer incorrectly converts geometry when having comma as decimal symbolPLAXIS 2D604677
Deconfinement feature might generate wrong stress distribution for dry conditionsPLAXIS 2D669296

PLAXIS 2D/3D CONNECT Edition V21 - Service Release 1

Released: February 2021
The following issues were resolved

Solved Known issueApplicationIssue #
PLAXIS CONNECT Edition V21.00.00 calculation does not start due to a license issuePLAXIS 2D
PLAXIS 3D		540768
Tunnel beams/girders generated in the wrong directionPLAXIS 3D499737
Geogrids may trigger a Run-time kernel error [256]PLAXIS 3D473803
PLAXIS 2D meshing stops with error Ordinal 747 not locatedPLAXIS 2D447463

PLAXIS 2D/3D CONNECT Edition V20 Update 4

Released: September 2020
The following issues were resolved

Solved Known issueApplicationIssue #
1D Site Response Analysis does not work in non-English versionsPLAXIS 2DSW-47784
Deconfinement method gives unexpected results in case of pore water pressure change in PLAXIS 2DPLAXIS 2D379697

PLAXIS 2D/3D CONNECT Edition V20 Update 3

Released: June 2020
The following issues were resolved

Solved Known issueApplicationIssue #
SciTE issues when running a Python scriptPLAXIS 2D
PLAXIS 3D		SW-47996
Objects names with special Unicode characters may fail in meshingPLAXIS 3DSW-47115

PLAXIS 2D/3D CONNECT Edition V20 Update 2

Released: March 2020
The following issues were resolved

Solved Known issueApplicationIssue #
Permeability value change not stored when changing from From data set to NonePLAXIS 2D
PLAXIS 3D		SW-21183
Ignoring suction after a fully coupled flow-deformation analysis in Safety analysis gives incorrect stresses in PLAXIS 2DPLAXIS 2DSW-45205

Detailed data per specific release for older versions not yet available